[. . . ] The model/serial rating plate located behind the storage drawer on the right-hand side oven door frame has information on the types of gas that can be used. [. . . ] Provide a gas supply line of 3/4" (1. 9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. Usually, LP gas suppliers determine the size and materials used in the system. NOTE: Pipe-joint compounds that resist the action of LP gas must be used. If the cabinet depth is greater than 24" (61. 0 cm), oven frame must extend beyond cabinet fronts by ½" (13. 0 mm) minimum. IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. A. clearance from both sides of range to side wall or other combustible material. M *NOTE: 24" (61. 0 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹/" (0. 64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0. 015" (0. 4 mm) stainless steel, 0. 024" (0. 6 mm) aluminum or 0. 020" (0. 5 mm) copper. [. . . ] 30" (76. 2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. [. . . ]